Part # : WST-PIP001

• Supports output resolutions up to 4K@60Hz RGB 4:4:4, HDR10, & 3D format.
• Supports 4K UHD and DCI resolutions up to 60fps RGB or YUV 4:4:4.
• Supports Dolby Vision, HDR10 and HLG HDR formats, as well as ITU-R BT.2020 and BT.2100 color spaces.
• Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources.
• Capable of high-bitrate multichannel audio passthrough, including Dolby Atmos™ and DTS:X.
• Supports seamless AV source switching, Genlock mode for zero end-to-end latency; max distance of 100m point-to-point.
• Powerful video scaling can match a connected display to the video source, leaving the original source content unaltered.
• Balanced analog audio port can be configured as an input or output for a discrete audio stream or HDMI de-embedding.
• USB2.0 HUB ports for extension and routing of USB devices.
• Video wall processing including display bezel compensation.
• Multiview processing including display bezel compensation.
• 802.3at PoE+ compliant.
• Auxiliary 1GbE channel for network connectivity of attached source devices.
• XFI (IEEE 802.3ae) 10G IP Switch compliant.
• Basic configuration via front panel buttons with an On-Screen Display (OSD).
• Easy-to-maintain AV system via IP master controller with Preview function which makes switching easier.

WST-PIP001 is a 4K@60Hz 4:4:4 HDMI / DP over IP with USB2.0 HUB transmitter. It is designed for high-quality installations that require AV extensions with minimum latency through IP transmissions. With an ultra-light compression scheme (lossless for most content), 4K audio/video streams (HDMI or DisplayPort) can be transmitted simultaneously in under 0.1 milliseconds. A full suite of peripherals are supported, including 1G Ethernet, RS232, IR and USB 2.0 hubs. The device can be powered directly by PoE when connected via Cat.6a to a 10-Gigabit Ethernet switch (802.3at), providing greater flexibility of installation locations. The built-in EDID and HDCP management functionality enable the unit to fit into any situation. Basic configuration of the unit can be done via the front panel buttons with an On-Screen Display (OSD). Advanced control requires an optional control center or control software and a LAN connection.

1. Transmitter x 1
2. 12V/3A Multi-Country Power Adapter x 1
3. 3-pin Terminal Blocker x 1
4. Footpad x 4