GS-MPI005HD MKII

Next Generation HD Voice Broadcaster’s Phone

Next Generation Rackmount HD Voice Broadcasters’ Mobile Phone
Provides extended new features compared to previous devices, but retains proven reliable call quality
Touch Screen Colour Display
Allows multiple new options for setup, control & easy day to day use
Handset interface for off air call screening
Allows a user to have an off air conversation/ dial or answer a call via the handset before transferring the call to the XLR/ Dante® circuits
GSM/ 3G (UMTS)/ 4G (LTE) Calls
Two different versions available, US and EU to allow users to select the range of frequencies that work best for them
Optional network audio interface
Dante® (AES67 compliant) interface for both off air and broadcast calls
GPIO, programmable GPIO for interfacing to other studio equipment
50 number phonebook
1RU Mains Powered Rack
Wide range internal switch mode power supply
New Web interface remote control & improved system responsiveness.

Purchase GS-MPI005HD MKII

Edit Content

Glensound invented the Broadcaster’s mobile phone and our GS-MPI005 and GS- MPI005HD mobile phone racks have been hugely popular with broadcasters and can be found in daily use in outside broadcast trucks and studios around the World.

The completely updated GS-MPI005HD MKII is a mains powered 1RU subrack that can be fitted with up to two mobile phones featuring professional audio interfaces for connecting broadcast audio equipment to cell phone networks.

On the surface the new GS-MPI005HD MKII looks different as it has touch screen colour displays for each phone module fitted. A traditional telephone handset interface is also now provided to allow an operator to communicate off air before handing the call over to broadcast. The handset interface can also dial and answer calls.

No new modern piece of audio broadcast equipment is complete without an AoIP solution so the new GS-MPI005HD MKII has an optional Dante®/ AES67 card.

Of course the crystal clear sound and audio inputs & outputs that are interference free of cell phone noise that made the original units so popular also feature in this new design.

Edit Content

AUDIO

Amplifier Type Low Noise Class D

Amplifier Power 10 Watts

Amplifier THD + Noise 0.02% @ 1 Watt @ 1kHz

Digital Line Up User selectable -24, -20 -18 dBFs

Input Gain Boost 0, +6, +12 +18dB

Input Channel Gain Trim +/-16 dB

Loudspeaker Impedance 8 Ohms

Loudspeaker Cone Type Poly damped woven glass fibre with copper cap and rubber surround

Loudspeaker Magnet High energy ferrite

LF Cut User selectable (on/off ) Knee X Hz 12dB/Octave

Voice EQ Frequency Settings 300Hz to 3kHz 12dB/ Octave

NETWORK

Connector Neutrik EtherCON (mates with standard RJ45)

Type 100 Mbit/s

AoIP Audio Dante® Audinate Ultimo chipset (AES67 Compliant)

AoIP Audio Sample Frequency 4 channels @ 48k or 2 channels @ 96k (Dante® only)

AoIP Resolution Up to 24 Bit

POWER

PoE Powered by PoE, Complies to: IEEE 802.3af-2003, Classification Class 0

Consumption 12.8 Watts

PoE Source Can be powered by PoE enabled network switches or Mid-Span PoE injectors

Energy Saving Mode Automatic energy saving mode (shuts down power amplifier when no audio present)

User settable delay 15, 30 & 60 mins.

PHYSICAL

Size 190 x 128 x 100mm (HxWxD) 7.5 x 5 x 3.9″

Weight 1.725Kg 3lb12oz

Mechanics Bespoke diecast aluminium chassis. Powder coated and printed with UV stable ink.

Mounting Points 75 x 75mm (2.95 x 2.95″) VESA mount 2 of mic stand thread socket 5/8″ 27tpi

Packaging Printed Retail cardboard box, packed inside plain rugged cardboard box

175 x 145 x 225mm (WxDxH)

Individual Shipping Weight 1.975Kg

ENVIRONMENTAL

Operating Temperature: 0 to +50°C (32 to 122°F)

Storage Temperature: -20 to +70°C (-4 to 158°F)

Relative Humidity: 0 to 95% non-condensing

INCLUDED ITEMS

Quick Start Guide Printed folded A4 (Full handbook by download)

RJ45 Network Cable 2 metre Cat5 RJ45plug /RJ45plug cable

Edit Content

NETWORK
Physical Interface: 1 of RJ45 Neutrik Ethercon
Audio Sample Frequency: 48kS/s
Transfer Rate: 100Mbps
Dante® Chipset: Ultimo UXT-01-004 (Note: Audiante recommend no more than 10 Ultimo chipsets on one network UNLESS another Dante® device such as the Brooklyn Module (found in 8 channel Beatrice/ Dark units), is on the same network )
AES67 Compliant: The audinate Ultimo Chipset is AES67 Compliant.

AUDIO
Mic Gain Range: 60 to 20dB
Phantom power: 12 Volts
Equivalent Input noise: 110dB (20-20Khz RMS weighted 300 Ohms)
Headphone Impedance: 32-1000 Ohms
Max headphone Output Level: +10dB into 600 Ohms
Headset Connector: 5 pin XLR Socket fitted as standard, 4 pin XLR plug (order code B1 4pin)
Band Pass Filter: 50Hz to 15kHz

CALL CIRCUIT
Inband Calling Frequency: 20kHz
Amplitude: -20dBFs
Duration Of Signal: 2 Seconds
Compatibility: All Glensound Beatrice units & studio technologies.

POWER
Power Over Ethernet (PoE): 48V
Consumption: 3 Watts

PHYSICAL
Mechanics: All aluminium with laser etched panels and light textured black powder coated sides.
Beltclip: Long life spring loaded plastic
Size (Body Excluding Beltclip): 65x132x37mm (WxLxH)
Weight: 648g / 8.8oz
Shipping weight: 0.75
Shipping Size 31x26x9
Shipping Carton: Rugged export quality cardboard

ENVIRONMENTAL
Operating Temperature: 0 to +50°C (32 to 122°F)
Storage Temperature: -20 to +70°C (-4 to 158°F)
Relative Humidity: 0 to 95% non-condensing

INCLUDED ITEMS
Handbook: By download
RJ45 Network Cable: 2 metre Cat5 RJ45 plug / RJ45 plug Cable

Edit Content

As standard the Beatrice B4 is supplied with a 3 pin XLR socket for the microphone input and a 6.35mm (1/4″) stereo jack socket for the headphone output.

It can, however, be ordered with either a 4 pin or 5 pin XLR headset interface.

Part numbers are:

Beatrice B4-X4 (4 Pin XLR)

Beatrice B4-X5 (5 Pin XLR)

Wiring for the headset interfaces is to common standards as detailed below. It may be possible to provide other custom wiring configurations if required, please email [email protected] with your requirements.

Beatrice B4-X5 Wiring Info

Connector type: 5 Pin XLR Socket (female XLR fitted, suitable for mating with cable mounted male)

PIN 1: Mic –
PIN 2: Mic +
PIN 3: GND
PIN 4: Headphone Left
PIN 5: Headphone Right

Beatrice B4-X4 Wiring Info

Connector type: 4 Pin XLR Plug (male XLR fitted, suitable for mating with cable mounted female)

PIN 1: Mic – (Mic GND)
PIN 2: Mic +
PIN 3: Headphone GND
PIN 4: Headphone +

Edit Content

GS-MPI005HD MKII EU FREQUENCY

LTE (4G): Bands 20, 8, 3, 7 & 1 (800, 900, 1800, 2600 & 2100 MHz)
UMTS (3G): Bands 8, 3 & 1 (900, 1800 & 2100 MHz)
GSM (2G): Dual Band (900 & 1800 MHz)

GS-MPI005HD MKII US FREQUENCY

LTE (4G): Bands 17, 5, 4 & 2 (700, 850, 1700 & 1900 MHz)
UMTS (3G): Bands 5, 4 & 2 (850, 1700 & 1900 MHz)
GSM (2G): Quad Band (850, 900, 1800 & 1900 MHz)

VOICE SUPPORT

HR, FR, EFR, AMR narrowband & AMR wideband (HD Voice)
LTE (Via VoLTE (Voice over LTE)) and CSFB (circuit-switched fallback)

Edit Content

GS-MPI005HD MKII

Next Generation HD Voice Broadcaster’s Phone

Purchase GS-MPI005HD MKII

SPEAK WITH our sales team