Pro Convert HDMI 4K Plus Module

Converts a 4K HDMI input signal into high-bandwidth NDI® with loop-through
  • A hot-swappable module to be installed in Magewell Modator chassis
  • Supports up to 4096×2160 60fps (4:4:4) input signals including 1080p 144fps
  • Centrally manageable via the Modator chassis and Magewell Control Hub

For standalone version with same specification.


Specifications and Features

  • 1* RJ45 1000Mbps Ethernet port
  • 1* USB Type-C port for configuration
  • 1* HDMI 2.0 input port
  • 1* HDMI 2.0 output port
  • 1* Modator interface for connecting to Modator 2U (hot-swappable)
Input & Loop-Through Features
  • Max. input & loop-through signal: 4096×2160 60fps 4:4:4 8-bit
  • Input videos at any format by customizing the EDID of input port
  • Supports RGB and YUV BT.601/709/2020 signals
  • Supports 8-channel HDMI-embedded audio
NDI® Encoding Features

Encode and output real-time streams of Full NDI® at up to:

  • 4096×2160 60fps 4:2:2 8-bit
  • 1920×1080 240fps 4:2:2 8-bit

Output the same resolution as input or any custom resolution. Typical outputs include:

  • 4096x2160p/3840x2160p/2048x1080p 23.98/24/25/29.97/30/50/59.94/60
  • 1920x1080p/1280x720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
  • 1920x1080i 25/29.97/30/50/59.94/60
  • 720x480p/720x480i 59.94/60/119.88/120
  • 720x576p/720x576i 50/100
  • Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
  • Encode 8-channel NDI-embedded audio
  • Supports NDI® 5.x
Web UI
  • Register with Magewell Control Hub for remote centralized management
    Supports configuring and managing via Web UI
  • Provides comprehensive information regarding the device and decoded signals in real-time
  • Allow to configure how a signal is decoded and output, including OSD settings, deinterlacing, resolutions, audio gain, sample rate, and channel mapping, as well as the network connection
  • Supports updating firmware
  • Supports USB RNDIS/ECM
  • Supports IE/Edge/Firefox/Chrome/Safari/Opera web browsers
  • Provides HTTP APIs
LED Indicators

Input signal:

  • On: locked
  • Off: unlocked

Loop through signal:

  • On: device connected and signal detected
  • Off: undetected
Physical Specifications
  • Form factor: 184.4mm (L) x 30.0mm (W) x 81.5mm (H)
  • Weight: ≈ 295g
Power Consumption Max power consumption: 7W
Working Environment
  • Operating temperature: –10 to 45 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative humidity: 5% to 90% non-condensing