Pro Convert for NDI® to HDMI Module

Converts a live NDI® stream into HD HDMI signal
  • A hot-swappable module to be installed in Magewell Modator chassis
  • Decodes high-bandwidth NDI and NDI HX including earlier variants into HD HDMI
  • Centrally manageable via the Modator chassis and Magewell Control Hub

For standalone version with same specification.


Specifications and Features

  • 1* RJ45 1000Mbps Ethernet port
  • 1* USB Type-C port for configuration
  • 1* USB Type-A 3.0 port for connecting peripherals
  • 1* HDMI 2.0 output port
  • 1* Modator interface for connecting to Modator 2U (hot-swappable)
Decoding Features
  • Decode up to 2Kp60 streams of Full NDI®, NDI® |HX, NDI® |HX2, NDI® |HX3, RTSP, HTTP, HLS, RTMP Pull/Push, MPEG-TS over UDP/SRT/RTP, TVU protocols
  • Decode H.264/H.265 video
  • Decode AAC/MP3 audio
  • Supports NDI® 5.x
Output Features
  • Max. output: 4096×2160 60fps 4:4:4 8-bit
  • Deliver video at the preferred video format according to the EDID of the connected monitor. Supported output formats include:
    • 4096x2160p/3840x2160p 23.98/24/25/29.97/30/50/59.94/60
    • 2560x1440p 60/100
    • 2560x1080p 23.98/24/25/29.97/30/50/59.94/60
    • 1920x1080p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
    • 1920x1080i 50/59.94/60
    • 1280x720p 23.98/24/25/29.97/30/50/59.94/60
    • 720x576p50
    • 720x576i50
    • 720x480p59.94/60
    • 720x480i59.94/60
  • Supports RGB, YUV444, and YUV422 signals
  • Supports 48KHz 8-channel audio output
SDI Output Features
  • Max. output: 1920x1080p60. Supported output formats are:
    • 1920x1080p 23.98/24/25/29.97/30/50/59.94/60
    • 1920x1080i 50/59.94/60
    • 1280x720p 24/25/29.97/30/50/59.94/60
    • 720x576p50
    • 720x576i50
    • 720x480i59.94
  • Supports YUV BT.601/709 signals
  • Supports 48KHz 8-channel audio output
  • Supports SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) standards
  • Output 3G-SDI signal with a transmitted distance greater than 150m
Web UI
  • Register with Magewell Control Hub for remote centralized management
  • Supports configuring and managing via Web UI
  • Provides comprehensive information regarding the device and decoded signals in real-time
  • Allow to configure how a signal is decoded and output, including OSD settings, deinterlacing, resolutions, audio gain, sample rate, and channel mapping, as well as the network connection
  • Supports updating firmware
  • Supports USB RNDIS/ECM
  • Supports IE/Edge/Firefox/Chrome/Safari/Opera web browsers
  • Provides HTTP APIs
LED Indicators Decode status indicator
  • On: decoding
  • Blinks: decoding error
  • Off: source unselected
Physical Specifications
  • Form factor: 184.4mm (L) x 30.0mm (W) x 81.5mm (H)
  • Weight: ≈ 290g
Power Consumption Max power consumption: 4.3W
Working Environment
  • Operating temperature: –10 to 45 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative humidity: 5% to 90% non-condensing