N40 4K HDMI
N40 4K HDMI FULL NDI® Codec
NDI® (Network Device Interface) is an IP-based video transmission technology developed by
NewTek (Vizrt). With the help of NDI-based ecological system, N40 4K HDMI NDI® encoder/decoder will benefit greatly from the versatility of an NDI-based IP workflow. One unit, dual use.
It is a compact and small unit, either to a pocket or mounted on the camera equipped with standard 1/4″ screw. N40 not only converts 4Kp60 HDMI video to NDI ® (Encoding) but also converts NDI to 4Kp60 HDMI (Decoding). It featured with big size Tally light, powered via PoE, DC or D-Tap (camera). What’s more, it has a 3.5 mm audio headset interface, and support audio intercom (customization).
- IP-based post production
- Video output to screen
- Low latency transmission
- Video conferences
NDI encoding + decoding, one unit, dual use
- Plug-and-play operation, HDMII to NDI®, or NDI® to the screen;
● Equipped with HDMI input and output dual interfaces, which can be looped out on the monitor during streaming, or output HDMI signal during decoding;
● Preset 10 outputs, including 9 decoding addresses and 1 blank preset box (customizable background color), and USB extended keyboard for switching.
High quality and low latency transmission
- Support up to 4Kp60 HDMI input (4:4:4/4:2:2), backward compatible with SD/HD/VESA resolution and other special resolutions;
- Ultra-low latency, end-to-end latency is less than 100ms;
- FULL NDI high-quality encoding ensures excellent image quality, and lossless audio encoding ensures high-fidelity sound quality;
- Accurate clock and intelligent algorithm ensured video frame, image and audio synchronization.
More advanced functions at your palm
- Built-in large-size Tally light to indicate PGM (program output) or PVW (pre-monitor output) status;
- Support for PoE (Power over Ethernet) and 5-18V DC input powered by USB, mobile power or camera battery;
- Equipped with 3.5mm headset interface, support voice intercom (customization).
- PTZ control with protocols of Visca/Visca over IP/Pelco (special PTZ control protocols can be customized);
●Integrated with IMS software to realize functions such as remote management and control, NDI stream management and distribution, centralized call management, and large-scale program production management;
- SDK/API provided for secondary development.
1*HDMI（Loop or decoding output）
1*RJ45 1000Mbps Ethernet port (with PoE)
Up to UHD 4K60 (backward compatible with SD/HD/VESA)
NDI® codec capacity
1x NDI® encoding or 1x NDI® decoding
FULL NDI HD encoding, typical bitrate: [email protected] ,[email protected]
Tally light, power light and status connection light
PoE, DC, D-Tap (camera) optional. 5-18V wide range supported
-20~45℃ (Storage temperature: -20~70℃)
N3 3G-SDI FULL NDI® Codec
SDI and NDI® bi-directional converter
N30 12G SDI FULL NDI® Codec
12G-SDI and NDI® bi-directional conversion
U40 HDMI to NDI 4K Encoder
Turn Any Camera into NDI® Camera
N4 HDMI FULL NDI® Codec
HDMI and NDI® bi-directional converter
N40 4K HDMI FULL NDI® Codec
4K HDMI and NDI® bi-directional converter
FULL NDI Codec
12G-SDI Input & Loop Supported
NDI|HX Wireless Encoder
NDI|HX Wired Encoder
9 Channels of Video Simultaneous Decoding and Split-screen display Supported