Part # : WST-PIP002

• Supports output resolutions up to 4K@60Hz RGB 4:4:4, HDR10, & 3D format.
• Supports 4K UHD and DCI resolutions up to 60fps RGB or YUV 4:4:4.
• Supports Dolby Vision, HDR10 and HLG HDR formats, as well as ITU-R BT.2020 and BT.2100 color spaces.
• Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources.
• Capable of high-bitrate multichannel audio passthrough, including Dolby Atmos™ and DTS:X.
• Supports seamless AV source switching, Genlock mode for zero end-to-end latency; max distance of 100m point-to-point.
• Powerful video scaling can match a connected display to the video source, leaving the original source content unaltered.
• Balanced analog audio port can be configured as an input or output for a discrete audio stream or HDMI de-embedding.
• USB2.0 HUB ports for extension and routing of USB devices.
• Video wall processing including display bezel compensation.
• Multiview processing including display bezel compensation.
• 802.3at PoE+ compliant.
• Auxiliary 1GbE channel for network connectivity of attached source devices.
• XFI (IEEE 802.3ae) 10G IP Switch compliant.
• Basic configuration via front panel buttons with an On-Screen Display (OSD).
• Easy-to-maintain AV system via IP master controller with Preview function which makes switching easier.

WST-PIP002 is a 4K@60Hz 4:4:4 HDMI/DP over IP with USB2.0 HUB receiver. It is designed for high-quality installations that require AV extensions with minimum latency through IP transmissions. With an ultra-light compression scheme (lossless for most content), 4K audio/video streams can be simultaneously received in under 0.1 milliseconds. A full suite of peripherals are supported, including 1G Ethernet, RS232, IR and USB 2.0 hubs. The device can be powered directly by PoE when connected via Cat.6a to a 10-Gigabit Ethernet switch (802.3at), providing greater flexibility of installation locations. The built-in EDID and HDCP management functionality enable the unit to fit into any situation. Basic configuration of the unit can be done via the front panel buttons with an On-Screen Display (OSD). Advanced control requires an optional control center or control software and a LAN connection.

Package Contents

1. Receiver x 1
2. 12V/3A Multi-Country Power Adapter x 1
3. 3-pin Terminal Blocker x 1
4. Footpad x 4

Interface

Inputs	10GbE Lan (RJ-45) x 1 Analog Audio (3.5mm) x 1
Outputs	HDMI Type-A (Female) x 1 Analog Audio (3.5mm) x 1
Bi-Directional Port	10GbE Lan (RJ-45) x 1
Control I/O	1G Ethernet (RJ-45) x 1 IR Extender (3.5mm) x 1 / Blaster (3.5mm) x 1 RS-232 (3-pin terminal block) x 1
Host	USB Mini-B port x 1
Device	USB2.0 Type-A HUB x 2

Transmission

HDMI Compliant	HDMI 2.0 (DVI 1.0)
HCDP Compliant	2.xV
IR Frequency	30-50 kHz
Max Input
10G Lan (Streaming)	4096×2160@60Hz YUV 4:4:4
Max Output
HDMI	4096×2160@60Hz RGB 4:4:4

Power

Power Supply	12V/3A DC (Locking)
Max. Power Consumption	24.5W

Product Structure

Main Material	Iron
Size (W x D x H)	231 x 108 x 25mm
Weight	555g

Environment

Operating Temperature	0˚C～40˚C
Storage Temperature	-20˚C～60˚C

Certification

Safety & Emission

CE / FCC / RoHS / REACH

Country of Origin Taiwan