Tally Box

Integrate tally lamps effortlessly into your production with simple Cat5 connectivity and customizable control via Raw Panel.

The Tally Box is an innovative solution for integrating SKAARHOJ tally lamps into production setups, connecting via Cat5 cables for simple and effective signaling. It works in harmony with Blue Pill devices, leveraging the Raw Panel (UniSketch) for customizable control. This device supports seamless connectivity with a range of switchers and video routers, enabling red and green tally lights to be managed efficiently. Its design simplifies cabling by carrying both power and signal, allowing up to three lamps to be daisy-chained from a single source, streamlining installation and reducing clutter.

Features

Cold shoe adapter

Strong and sturdy mountable cold shoe adapter in metal with locking washer.

Ready to take a beating for a life on the road.

Integrated switchers

Two switches are integrated on the Tally Light

On/off switch for main LED (red)

The main LED (red) provides a large, clear and bright light easy visible for the presenter to know which camera is on program.

The LED can be turned on/off with a switch on the tally light.

Dimmed on/off switch for operator LED (red + green)

The operator LED shines red when on program and green when on preview. With the swich on the tally light the operator LED can be dimmed when used in very low light conditions to avoid blinding the camera operator.

Daisy chain up to 3 tally lights

In a daisy chain configuration this would result in

Output 1-2-3 = Tally 5-6-7
Output 2-3-4 = Tally 6-7-8
Output 3-4-1 = Tally 7-8-5
Etc.

PoE

Ethernet with PoE (IEEE802.3af)

Technical Specifications

Dimensions

Tally Box

Length: 166 mm

Height: 47 mm

Width: 94 mm

Weight: 0.39 kg

Shipping data (Box)

Tally Box

Length: 95 mm

Height: 135 mm

Width: 60 mm

Weight: 0.136 kg

Data Sheet

Connectivity
Networking	100 Mbit Ethernet w/Power over Ethernet (PoE IEEE802.3af)
Power Supply	12V DC Jack 5.5mm x 2.1mm x 10mm Center Positive PoE IEEE802.3af/t
Service Port	Micro USB for updating firmwares and setting manual IP

Connectivity

Networking

100 Mbit Ethernet w/Power over Ethernet (PoE IEEE802.3af)

Power Supply

12V DC Jack 5.5mm x 2.1mm x 10mm Center Positive

PoE IEEE802.3af/t

Service Port

Micro USB for updating firmwares and setting manual IP

Software
Platform	UniSketch (Raw Panel Server, Legacy Device Cores)
Licenses	N/A

Physical and Shipping
Product Weight	390 g
Shipping Box Weight	864 g
In the Box	12V Power Supply: Manufacturer: PHIHONG, Model Name: PSA15R-120P, Output: 12V/1.25A, Cable Length: 1.5m, Adapter type: EU, GB, US, AU depending on shipping country, DC Output Connector: 5.5mm x 2.1mm x 10mm Center Positive Micro USB Cable Getting Started Guide
Recommended Accessories (not included)	Ethernet Cable: Cat 6 S/FTP or better
Country of Origin	Denmark