Ultra Encode HDMI Specifications

Ultra Encode SDI Specifications

Max HDMI input & loop-through signals:
- 4096×2160 60fps 4:2:0
- 4096×2160 30fps 4:4:4/4:2:2
Custom EDID
Supported inputs include:
- 4096×2160/3840x2160p 23.98/24/25/29.97/30/59.94/60
- 2560x1080p 23.98/24/25/29.97/30/50/59.94/60
- 1920x1080p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
- 1920x1080i 25/29.97/30/50/59.94/60
- 1280x720p 23.98/24/25/29.97/30/50/59.94/60/144
- 720x576p 50/100/144
- 720x576i 25/50
- 720x480p 59.94/60/144
- 720x480i 29.97/30
8/10/12-bit color
Input & loopthrough 8-Channel, 24-bit HDMI embedded audio, 192kHz sample rate
Input audio from 3.5 mm LINE IN
HDMI Input and loop-through interfaces: HDMI 1.4a, DVI-D

Dual stream encoding: main stream and sub stream
Max bitrates:
- Main Stream – 16Mbps
- Sub Stream – 2Mbps
Support resolutions:
- HD: 1920×1080, 1600×1200, 1440×1080, 1440×900, 1280×1024, 1280×960, 1280×800, 1280×720, 1024×768
- SD: 960×540, 800×600, 768×576, 720×576, 720×540, 640×480, 640×360, 480×360, 480×270
Supported frame rates: 60/59.94/50/30/29.97/25/24/15/10/5fps
H.264/H.265(HEVC) video encoders provide time code SEI message setting
Encoding 2-channel AAC at 48kHz, 16-bit
Supported audio bitrates: 256/192/128/96/64/48/32/16 kbps
Extracting audio from HDMI signal and output through LINE OUT
Encoding videos after de-interlacing

Natively support Facebook, Twitch and YouTube
Supported streaming protocols: RTSP/RTMP/RTMPS/SRT Caller/SRT Listener/NDI|HX2/HLS (push)/TS over UDP/TS over RTP
Allow simultaneous sessions over the same streaming protocol. Streaming protocols are as follows.
- Up to 6 sessions of TS over RTP and TS over UDP simultaneously
- Up to 6 sessions of SRT Caller and SRT Listener simultaneously, containing one SRT Listener session at most (max 8 clients simultaneously)
- Up to 6 sessions of RTMP and RTMPS simultaneously
Stream only 1 session of HLS (push), RTSP, or NDI|HX2
Total bitrates for different network connection types:
- 24Mbps for all streams is recommended for a wired network connection
- 16Mbps for all streams is recommended for a wireless network connection
Specify streaming main stream or sub stream for each session

Recording to a USB flash drive, internal SD storage and paired mobile device simultaneously
To a USB Flash Drive
- support auto-recording, normal recording
- recording as MP4 or MOV files
To internal SD storage (32GB)
- support auto-recording
- support loop-styled or normal recording
- recording as MP4 or MOV files
- uploading recorded videos to a specified FTP server
To paired mobile device
- recording as MP4 files
- taking still image snapshots during recording
- timer recording at 15s, 30s, 1min, 2min, 5min

Support registration on Magewell Cloud platform
Remotely control with WebUI and Magewell Cloud
Provide comprehensive information regarding the system information of device and working status in real-time
Video thumbnail preview
Configure parameters of volume and color, input and output signals, stream profiles, no signal image, the Ethernet and Wi-Fi connection, as well as date and time
Update firmware
Export configuration profiles of the device
Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
Provide HTTP APIs

LEDs indicating the status of power, input signal, streaming, Ethernet and Wi-Fi connection