• 594MHz HDMI receiver, max input video: 4096×2160 4:4:4 60fps
  Max input audio: 8-Channel, 24-bit HDMI embedded audio, 192kHz sample rate
• Support input RGB/YUV 4:4:4 8-bit, YUV 4:2:2 12-bit, or RGB/YUV 4:4:4 10/12-bit signals up to 594MHz pixel clock
• Support up to 8-channel IEC60958/IEC61937 audio streams via SDK
• Support HDR10
• HDMI input interface: LVDS 0.5PH 20-Pin to DVI-D 1.0, HDMI 2.0

• ~2400MB/s per channel DMA bandwidth in PCIe 3.x system
• ~1600MB/s per channel DMA bandwidth in PCIe 2.x system
• ~800MB/s per channel DMA bandwidth in PCIe 1.x system
• Video processing pipelines with ~360Mpixels/s processing bandwidth
• Capture videos up to 4096×2160, frame rates up to 240fps. Typical outputs include (actual capture frame rate can be limited by the PCIe bandwidth and internal working frequency.):
  • 4096x2160p 5/10/15/25/29.97/30/50/60
  • 3840x2160p 5/10/15/25/29.97/30/50/60
  • 1920x1080p 5/10/15/25/29.97/30/50/60/120
  • 1280x720p 5/10/15/25/29.97/30/50/60/120 etc.
• Output NV12/I420/YUYV/UYVY/RGB24/RGB32 videos
• Support custom output formats using Magewell Capture SDK
• Support custom EDID, video scaling, de-interlacing, color format conversion and frame rate conversion
• Support multiple replicated capture streams, and unlimited capture streams for any one input channel with the same format
• Support timestamp & A/V synchronization
  • Hardware based 100ns high resolution clock
  • Audio frames (192 audio samples) & video frames are stamped with hardware clock
  • Hardware clock can be synchronized across cards via SDK
• Support firmware upgrade

• The MWCapture SDK provides functions including signal status extraction, capture configuration and real-time audio & video capture, etc
• Windows DirectShow/DirectKS/Wave API/DirectSound/WASAPI
• Linux V4L2/ALSA

• Windows 10/11/Server 2016 (x86 & x64) and above
• Linux (x86, x64 & ARM architecture)

LVDS 0.5PH 20-Pin (Part number: 11580)

• DVI-D 1.0
• HDMI 2.0

• VLC
• VirtualDub
• OBS
• XSplit
• vMix
• VidBlaster
• Wirecast
• Microsoft Media Encoder
• Adobe Flash Media Encoder
• Any other DirectShow/V4L2 encoding/streaming software

Status LEDs indicate the working state of the device:

• Pulsing slowly: input signal unlocked
• On: input signal locked
• Double blinks: memory abnormal or FPGA configuration failed
• Off: firmware or power supply abnormal

• LVDS 0.5PH 20-Pin cable (Part number: 11580)
• LVDS 0.5PH 20-Pin to HDMI adapter (Part number: 11580) (20.5cm)

• Max current at 3.3V: ~ 2 A
• Max power consumption: ~6.6 W

• Operating temperature: 0 to 40 deg C
• Storage temperature: –20 to 70 deg C
• Relative Humidity: 5% to 90% non-condensing