Pro Convert SDI 4K Plus

Converts one-channel of 6G-SDI input signal into Full NDI® with loop-through
  • Supports up to 4096×2160 30fps input signals
  • Connects existing source equipment into NDI-enabled, IP-based media networks
  • Plug-and-play ease of use with automatic input format detection and DHCP network configuration
  • Supports 16 audio channels

Interface

Specifications and Features

Input & Loop through Features
  • Max video input & loop through: 4096×2160 30fps. Supported inputs include:
    • 4096x2160p/3840x2160p 23.98/24/25/29.97/30
    • 2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
    • 2048x1080i/1920x1080i 23.98/24/25/29.97/30/47.95/48/50/59.94/60
    • 1280x720p 50/59.94/60
    • 720×576 25p/50i (PAL SD)
    • 720×480 29.97p/59.94i (NTSC SD)
  • Support RGB/RGBA/YUV/YUVA signals with 10/12-bit color depth
  • Support RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
  • Support RGB, YUV BT.601/709/2020 video input
  • 16-channel SDI embedded audio inputs
  • SD/HD/3G/6G-SDI BNC input & loop through
  • Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425)/6G (ST 2081) SDI standards
  • Receive 6G-SDI transmitted up to 100m (328ft)

NDI® Encoding Features
  • Encoding Full NDI real-time stream at up to 4096×2160 60fps 4:2:2 8-bit
  • Output the same resolution as input or any custom resolution. Typical outputs include:
    • 4096x2160p/3840x2160p/2048x1080p/1920x1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
    • 2048x1080i/1920x1080i 25/29.97/30/47.95/48/50/59.94/60
    • 1280x720p 50/59.94/60
  • Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
  • Encoding 16-channel NDI-embedded audio
  • Support NDI 5.x

Configuration Management
  • Registration with Control Hub
  • Remote control via WebUI and Control Hub
  • Provide comprehensive information regarding the device and input signals in real-time
  • Allow to configure how a signal is decoded and output, including OSD settings, deinterlacing, resolutions, audio gain, sample rate, and channel mapping, as well as the network connection
  • Support for updating firmware
  • Support for USB RNDIS/ECM
  • Support for IE/Edge/Firefox/Chrome/Safari/Opera web browsers
  • Provision of HTTP APIs

On-board Control Buttons 16 Position Rotary DIP Switch: set board-index from 0 to F

PTZ Control
  • Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
  • Mini-DIN–8 jack (shared with Tally light)

Network Interfaces
  • 10/100/1000Mbps Ethernet
  • IEEE 802.3af PoE

USB Interfaces

USB2.0 Type B

  • 5V/2.1A power supply
  • USB RNDIS/ECM

Supported Products
  • NDI Studio Monitor
  • OBS
  • vMix
  • Any other NDI-enabled product

LED Indicators

Status LEDs indicate:

  • Power supply: on/off
  • Tally: preview/program
  • Input signal: locked/unlocked
  • Loop through signal: on/off

Form Factor 117.5mm (L) x 66.7mm (W) x 23.4mm (H)

Accessories
  • USB 2.0 A to B cable
  • 5V/2.1A power adaptor
  • Mini-DIN 8 breakout cable
  • L-bracket
  • Tally light

Screw Mounting Hole ¼–20 threaded hole

Power Consumption
  • 5V max current: ~ 1.5 A
  • Max power consumption: ~ 7 W

Working Environment
  • Operating temperature: 0 to 45 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing

Accessory

Included

Power Adapter (US/EU/UK/AU/JP)x1
Part number: ACC08010
Power Adapter (KR) x1
Part number: ACC08015
USB Type A to Type B cable x1
Part number: ACC00065
Mini DIN8 to DIN8+DB9 cable x1
Part number: ACC00110
L bracket x1
Part number: 92240
Tally Light x1
Part number: 99090

Two types of power adapters are provided as options to meet your need. Please choose the right part number when placing the order to our dealers. We recommend you always use the included accessories to avoid unnecessary damage to your device. Please note, the appearance of the power adapter may vary due to suppliers or batches. The images here are for reference only.

related product