Vita Mini

Compact Dante® Beltpack Commentary Unit With Talkback

  • Remote control from Windows 10 App
  • High quality broadcast on-air mic amplifier
  • Dante® (AES67 compliant) network audio connection via Ethercon RJ45
  • Referee compressor limiter
  • Single off air talkback circuit
  • Powered by PoE, or via external 12V DC
  • Compact design

Description

The VITA Mini is a very powerful Dante® network audio interface, in a compact belt pack style. It has a mic/line input and headphone monitoring connection for a single user, and contains two 4 wire circuits. One of these is typically used as an on air channel, and the other as a talkback channel. The high quality microphone input, with the Glensound Referee compressor, makes the Vita Mini suitable for on air commentary use, particularly when pitch side. The flexibility of the talk button configurations, means that the Vita Mini can also be used as a talkback unit as part of a Dante® or AES67 network.

VITA Mini is a low cost yet high quality broadcast tool, designed to keep both the company accountant and engineering department happy.

Two Four Wire Circuits
The VITA Mini has two 4 wire circuits. These are typically used as main programme on air, with a separate talkback circuit. The push buttons for each circuit are configurable and can operate in different modes, to allow configuration for different types of uses:

  • Latching on/off
  • Momentary push to talk (PTT)
  • Intelligent mode where a short tap is latching, but a longer hold becomes momentary
  • Always on and mutes when pressed (cough)
  • Pressing one button mutes the other circuit (talkback)

Headphone Monitoring
There is a 6.35mm jack socket for headphone monitoring. Each of the two 4 wire inputs can be selected to be in the left ear, right ear, or both ears of the headphones, depending on the users preference. The level of each input can also be independently selected.

The headphone amplifier is intelligent and capable of driving correct levels into low or high impedance headphones and capable of connecting directly to both stereo or mono headphones and earpieces.

The headphone monitor also includes sidetone (at a programmable level) - sidetone is the commentator’s own voice.

Single Input
The Vita Mini is a single user unit, with one high quality input. The input is mic/mic+48V/line switchable, on a 3 pin XLR, with a variable gain control. As the Vita can be used for on air broadcast, Glensound’s Referee compressor limiter is used to control the audio levels and prevent any clipping. The Referee compressor has been developed over many years of working with sports commentators, and provides a gently increasing compression as the input signal approaches clipping. In normal use the compressor is not active as it only starts working as clipping approaches, so normal dynamic range is maintained.

Network Audio Link
The VITA Mini is Dante® /AES67 network audio compatible. The network connection is via a single Neutrik XLR RJ45. This link carries:

  • 2 audio inputs
  • 2 audio outputs
  • Power over Ethernet (PoE)

AES67 Compliant
Vita Mini utilises the Ultimo chipset from Audinate (The company behind Dante®). The Ultimo chipset has been designated as AES67 compliant by Audinate and as such it is possible to use the Vita Mini in AES67 network environments.

The Vita Mini has two power sources. When connected to a PoE network switch or PoE midspan power supply. There is also an input for a 12 VDC connection.

PPM Meter
A front panel 4 segment PPM meter showing -12 to +6dB in 6dB steps provides confidence to the user that their outgoing level is set correctly and can also be used as a visual aid to indicate that the microphone has been switched on to the programme output.

Specification

Audio
Mic Input Gain Range -18dB to +12dB
Dynamic Mic Line Up 58dB
Mic + Phantom Power Line Up 42dB
Line Input Line Up 0dBu (Gain range +/-15dB)
Mic Input Impedance 2k4
Line Input Impedance > 30k
Equivalent Input Noise 124dBu (22-22kHz RMS terminated 300 Ohms)
Maximum Input Level Before Clipping
  • Dynamic Mic: -2dBu
  • Mic + 48V PH: +12dBu
  • Line: +18dBu
Frequency Response
  • Mic: > +/-0.25dB 50Hz to 22kHz (-2 @ 25Hz)
  • Line: >= -0.1dB 22Hz to 22kHz
THD + Noise (Ref +8dBu)
  • 100Hz = 0.016%
  • 1kHz = 0.012%
  • 10kHz = 0.011%
Headphone Impedance 32 to 1000 Ohms (Auto output level to match impedance)
Maximum Headphone Output +15.8dB into 600 Ohms
Headphone Frequency Response >= -0.1dB 22Hz to 22kHz
Headphone Noise -74dB @ lineup (residual noise)
Headphone THD + Noise (ref =8dBu) 0.008% @ 1kHz
Headphone Volume Pot Range +10dB to Off (+10dB to -20dB configuration option)
Remote Control
General Windows 10 app. Direct install on PC (Not App store download)
Power
PoE
  • May be powered by the PoE network port
  • Complies to: IEEE 802.3af-2003
  • Classification Class 0
Consumption < 7 Watts
DC Input 2.5mm Barrel, Centre +Ve, 9 - 15 Volts
Power On LED Bright Blue
Physical
Size 83 x 140 x 41mm (WxDxH) excl. beltclip
Weight 310g (0.68 pounds)
Mechanics All aluminium construction, anodized and laser etched, powder coated sides
Environmental
Operating Temperature 0 to +50 C (32 to 122 F)
Storage Temperature -20 to +70 C (-4 to 158 F)
Relative Humidity 0 to 95% non-condensing
Network
Connector Neutrik Ethercon (also mates with standard RJ45s)
Type 100BASE-TX
Dante® Network Interface
  • Sample Frequency: 48 - 96kHz
  • Resolution: 24 Bit
Included Items
Handbook Available by download
RJ45 Network Cable 2 metre Cat5 RJ45plug /RJ45plug cable
Beltclip Fitted
Optional Item
External PSU Switch mode power supply terminated with IEC mains plug
Shipping Specifications
Weight 1.81kg
Shipping Size 310 x 260 x 90mm
Shipping Carton Rugged export quality cardboard

Similar Products

Share this: