GS-HA013

Headphone Amplifier

  • Powered from 1 x PP3 long life battery
  • External DC power input
  • On/off switch
  • Blue power on LED Compact size with belt clip
  • 2 balanced inputs on rear panel XLRs
  • 1 input switchable to unbalanced stereo
  • Input gain controls
  • Separate left/right headphone gain controls
  • Phase reverse right ear switch
  • 2 x Headphone jacks 6.35mm (A/B gauge)
  • 1 x Headphone jack 3.5mm
  • Headphone impedances of 32 - 1000 ohms
  • Each input can be switched from left ear, right ear, or both

Description

The GS-HA013 like other units in this range is small, robust and economical. It provides 1 off headphone amplifier in a compact format. It builds on the successful GS-HA001 and adds switches to allow each input to be routed to the left ear, right ear, or both. A toggle switch turns the unit on/off and a bright blue LED indicates that the unit is on and flashes when the battery is getting low.

Audio input is on 2 XLRs normally feeding left & right channels of the headphone amp. A switch is provided to allow an unbalanced stereo signal input on just 1 off these XLRs to be feed to both channels of the headphone amp.

A phase reverse of the right ear facility is provided (operation by a small toggle switch). 2 off headphone jack connections are provided (in parallel) each connector is suitable for use with both A and B gauge jack plugs.

Specification

Audio Input
Balanced Input Impedance > 50k Ohms
Unbalanced Stereo Input Imepdance > 22k Ohms (on each side)
Input Gain Range -20dBu to +8dBu
Frequency Response -1dbu @ 20Hz & 20 kHz
Noise
  • -54dBu (RMS 22-22kHz) @ Max Gain
  • -85dBu (RMS 22-22kHz) @ Min Gain
Headphone Output
Headphone Impedance 200 Ohms to 2K Ohms
Headphone Level Range -20dBu to +10dBu
Maximum Headphone Levels
  • +19dBu into 2K Ohms
  • +18dBu into 600 Ohms
  • +16dBu into 200 Ohms
2x Headphone Connectors 6.35mm A & B gauge Wired in Parallel
1x Headphone Connector 3.5mm Wired in Parallel with 6.35mm
Other
Power
  • Internal: 1 x PP3 9V battery
  • External: 12 to 20V @ < 44mA 2.5 mm Jack (inner positive)
Battery Indicators
  • Steady blue LED indicates good battery
  • Flashing blue LED indicates low battery
Weight 380g (including battery)
Size (H x W x D) 43 x 101 x 103 mm (H x W x D)

Similar Products